Advertisement
1
This is how the
machine should look
when you enter the
room.
4
Fill solution tank with
water (do not exceed
130 F). Add appropriate
cleaning chemical.
7
Inspect brush or pad.
10
Turn on machine. Verify
there is enough battery
life to complete job.
Warrior/34RST with EcoFlex How To
Prepare for use
2
5
8
11
Unplug battery charger.
Wrap cord accordingly.
Do not mix detergent in
the tank for EcoFlex
models.
Install brush or pad-
holder under the deck.
Use paddle to move
forward or reverse.
Adjust speed of
machine as needed.
3
Inspect recovery tank
then lower the lid.
6
Inspect squeegee
blade, install squeegee
on machine and attach
recovery hose to the
squeegee inlet.
9
Install brush for
Cylindrical models
12
Turn on scrub switch,
lower squeegee lever
and begin scrubbing.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Nilfisk-Advance Warrior 34RST
Summary of Contents for Nilfisk-Advance Warrior 34RST
- Page 1 Warrior/34RST with EcoFlex How To Prepare for use This is how the Unplug battery charger. Inspect recovery tank machine should look Wrap cord accordingly. then lower the lid. when you enter the room. Fill solution tank with Do not mix detergent in Inspect squeegee water (do not exceed the tank for EcoFlex...
- Page 2 Warrior/34RST How To Store the Machine Wash recovery tank Empty recovery tank Remove vacuum motor and vacuum grid inlet and solution tank. inlet screen. Do not filter with clean water. Empty water in suitable allow water to enter the drain or bucket. Vacuum motor inlet screen while cleaning.
- Page 3 Warrior/34RST How To Daily Maintenance Clean recovery tank Check and clean Charge Batteries switches and vacuum recovery and solution inlet screen. tank and hoses. Check, clean and rotate Clean and check the Clean Hopper on the brushes/pads. squeegee. Cylindrical models. Weekly Maintenance Inspect scrub housing Inspect and clean...
Need help?
Do you have a question about the Warrior 34RST and is the answer not in the manual?
Questions and answers