Download  Print this page

Sony 600TVL O.S.D. WDR SERIES Service Manual

O.s.d. wdr series 1/3” sony dsp color ccd camera.
Hide thumbs

Advertisement

SERVICE MANUAL
1/3" SONY DSP COLOR CCD CAMERA
600TVL O.S.D. WDR SERIES
The serial number of this product may be found
on the bottom of the unit.
You should note the serial number of this unit in
the space provided and retain this instruction as a
permanent record of your purchase to aid
identification in the event of theft.
Model No.
Serial No.
V.4B_W_M

Advertisement

   Related Manuals for Sony 600TVL O.S.D. WDR SERIES

   Summary of Contents for Sony 600TVL O.S.D. WDR SERIES

  • Page 1 SERVICE MANUAL 1/3” SONY DSP COLOR CCD CAMERA 600TVL O.S.D. WDR SERIES The serial number of this product may be found on the bottom of the unit. You should note the serial number of this unit in the space provided and retain this instruction as a permanent record of your purchase to aid identification in the event of theft.
  • Page 2: Safety Warning

    ① CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK), NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is interned to alert the user to the presence of uninsulated “dangerous voltage”...
  • Page 3: Main Features

    It provides the most reliable and accurate color picture in the security industries. Main Features Color camera with SONY 1/3” Super HAD II CCD sensor. Employs Digital Signal Processor (DSP) chip-set for image control. Ultra high resolution 600TVL (B/W 650TVL).
  • Page 4 ③ Parts Names & Components Hex Screwdriver Hole to fix lens Auto Iris Plug Auto iris connector C-Mount Ring (Option) Manual Power LED Selection & setting buttons Auto Iris Function DC DRIVE Pin 1 (Red) Drive - Pin 2 (N.C) Drive + Pin 3 (White) Damp +...
  • Page 5: Installation Instructions

    ④ Installation Instructions (1) Remove the cap from the lens mount. (2) Select the C mount lens (with mount ring) or CS mount lens. (3) Screw and fasten the lens into the lens mount. (4) Connect the video output wire between monitor and camera through 75ohm type coaxial cable.
  • Page 6: Menu Operation

    ⑤ Menu Operation ‧ Press the SET button to display the menu on screen. ‧ Press the UP or DOWN button to select the item. ‧ The selected item will be highlighted. ‧ Press the LEFT or RIGHT button to change mode. ‧...
  • Page 7: Special Menu

    ⑥ range of color temperature is 2,000°K~9,500°K. ‧ ATW2 Auto Tracking White Balance. The white balance will adjust continually according to the color temperature of the object. The range of color temperature is 2,000°K~10,500°K. ‧ AWC SET Auto White Balance Control. Push to set white balance according to the color temperature of the background.
  • Page 8 ⑦ PRIVACY (Privacy Zone) Cover the areas you do not wish to appear on screen. ‧ ON AREA1~AREA8 adjustable. 0~15 COLOR adjustable. ‧ OFF To disable this function. PARK. LINE (Parking Line) ‧ ON Parking line guide display on screen. ‧...
  • Page 9: Specification

    OSD WDR with ICR (True DAY & NIGHT) IR OPTICAL FILTER Built-in anti-aliasing IR-cut filter Built-in anti-aliasing IR-pass (850nm) filter PICK-UP DEVICE Sony 1/3" Super HAD II High Resolution CCD EFFECTIVE PICTURE NTSC: 768*494 ELEMENTS (H*V) PAL: 752*582 SIGNAL PROCESSOR D.S.P.
  • Page 10 Appendix Installation Manual for Special Application: License Plate Recognition 1. A 5-55mm or other more than 10X suitable vari-focal auto iris lens is recommended. Connect regulated DC12V power supply to the power input at the rear panel of camera. Connect BNC video cable to the video output at the rear panel of camera.
  • Page 11 Daytime setting: Adjust the lens focus to see a clear image both at the center and the upper / down edges of the monitor. If the image on the monitor is too bright, adjust the shutter speed accordingly. Enter EXPOSURE sub-menu under SETUP menu and select “SHUTTER”. Select shutter speed according to the speed of vehicle.

Comments to this Manuals

Symbols: 0
Latest comments: