Error Table; Part Two Firmware Update; Update Firmware Via Usb - Tally Dascom DL-210 Maintenance Manual

1.4 Error Table

LEDs
Power
Status
Error

Part Two Firmware Update

2.1 Update firmware via USB

Dascom is not liable if customers are doing a firmware update by
themselves. If power is switched off during the process, the printer may be
damaged afterwards.
(1) Preparation
USB cable, 24V power adapter, DL-210 setup tool, firmware file.
(2) Connection
Connect printer and host with USB cable firmly. Check the Device Manager, if connection
is successful, "USB printing support" will display under "universal serial Bus Controllers"
directory. Otherwise, please check the connection between printer and USB interface,
please check whether the Driver installation is successful or not.
LEDs' behavior
On ○
Off ●
On ○
Off ●
Fast blink ○●○●○●○
Slow blink ○●●○●●○
On ○
Off ●
Fast blink ○●○●○●○
5
Status
Power on.
Error or power off.
Paper end.
Normal.
Label remains in peeler.
Ribbon end.
Print head mechanism is
opened.
Normal.
Print head is over-heated.