Electrolux ESL7845RA User Manual page 17

Starting a programme
When you activate the appliance, the
display shows the programme list. The
programme ECO is always the default
programme.
1. Scroll the programme list and select
a programme.
2. Select applicable options if desired.
Once options are set, go back to the
programme list to start the selected
programme.
3. Press OK.
If the programme is applicable to the
option TimeManager, you have to
confirm Fast or Normal.
4. Close the appliance door to start the
programme
How to delay the start of a
programme
It is not possible to set the delay start
with the MyFavourite programme.
1. Select a programme.
2. Press Option.
The display shows the option list.
3. Select Delay start.
4. Press OK.
5. Select the number of hours desired
for the delay start.
You can delay the start of a programme
from 1 to 24 hours.
6. Press OK to confirm.
7. You can select other applicable
options.
8. Press repeatedly Option until the
display shows the selected
programme.
9. Press OK.
10. Close the appliance door to start the
countdown of the delay start.
When the countdown is completed, the
programme starts automatically.
Opening the door while the
appliance operates
Opening the door while a programme is
running stops the appliance. It may affect
the energy consumption and the
programme duration. After closing the
door, the appliance continues from the
point of interruption.
If the door is opened for
more than 30 seconds
during the drying phase, the
running programme ends. It
does not happen if the door
is opened by AirDry function.
Cancelling the delay start while
the countdown operates
When you cancel the delay start the
programme and the options are set to
their default values.
1. Open the appliance door.
2. Press and hold Option for about 3
seconds until the display shows: Stop
washing?.
• Select Resume and press OK to
continue with the countdown.
Close the appliance door.
• Select Stop and press OK to
cancel the delay start.
Cancelling a running
programme
When you cancel the running
programme the options are set to their
default values.
1. Open the appliance door.
2. Press and hold Option for about 3
seconds until the display shows: Stop
washing?.
• Select Resume and press OK to
continue with the running
programme. Close the appliance
door.
• Select Stop and press OK to
cancel the running programme.
End of programme
When the programme is completed, the
TimeBeam displays 0:00 and CLEAN.
1. Press the on/off button or wait for the
Auto Off function to automatically
deactivate the appliance. If you open
the door before the activation of Auto
ENGLISH 17