Electrolux ESL7845RA User Manual
Hide thumbs Also See for ESL7845RA:

Advertisement

Quick Links

ESL7845RA
EN
Dishwasher
User Manual

Advertisement

Table of Contents
loading

Summary of Contents for Electrolux ESL7845RA

  • Page 1 ESL7845RA Dishwasher User Manual...
  • Page 2: Table Of Contents

    13. TECHNICAL INFORMATION................. 25 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.
  • Page 3: Safety Information

    ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
  • Page 4: Safety Instructions

    The operating water pressure (minimum and • maximum) must be between 0.5 (0.05) / 8 (0.8) bar (MPa) Obey the maximum number of 13 place settings. • If the supply cord is damaged, it must be replaced by •...
  • Page 5 ENGLISH • Connect the mains plug to the mains • Dishwasher detergents are socket only at the end of the dangerous. Obey the safety installation. Make sure that there is instructions on the detergent access to the mains plug after the packaging.
  • Page 6: Product Description

    3. PRODUCT DESCRIPTION Top spray arm Detergent dispenser Upper spray arm Comfort Lift basket Lower spray arm Release handle Filters Lower basket handle Rating plate Upper basket Salt container Cutlery drawer Air vent Rinse aid dispenser 3.1 TimeBeam TimeBeam displays the following...
  • Page 7: Control Panel

    ENGLISH When AirDry is activated during the drying phase, the projection on the floor may not be completely visible. To check the remaining time of the running programme, look at the control panel display. 4. CONTROL PANEL On/off button OK key Navigation key (up) Navigation key (down) Display...
  • Page 8 Programme Degree of soil Programme pha‐ Options Type of load AutoFlex • All • Prewash • XtraDry • Crockery, cut‐ • Wash from 45 °C 45°-70° lery, pots and to 70 °C pans • Rinses • Dry FlexiWash • Mixed soil •...
  • Page 9: Settings

    ENGLISH Water Energy Duration Programme (kWh) (min) AutoFlex 45°-70° 8 - 15 0.7 - 1.7 46 - 170 FlexiWash 50°-65° 14 - 16 1.2 - 1.5 160 - 180 Intensive 70° 12.5 - 14.5 1.4 - 1.7 170 - 190 GlassCare 45°...
  • Page 10 Settings Values Description Volume From level 1 to level Adjustment of the sound volume. Brightness From level 0 to level Change the brightness of the display. Contrast From level 0 to level Change the contrast of the display. Water hardness...
  • Page 11: Options

    ENGLISH 6.5 How to save the MyFavourite programme You can only save 1 programme at a time. A new setting cancels the previous one. 1. Press the Option key. 2. Select Settings. 3. Press the OK key. 4. Select MyFavourite. 5.
  • Page 12 If an option is not applicable Activating options can affect to a programme, the related the water and energy indicator is off or it flashes consumption as well as the quickly for a few seconds programme duration. and then goes out.
  • Page 13: Before First Use

    ENGLISH 7.4 TimeManager 1. Scroll through the programme list and select a programme. This option increases the pressure and 2. Press the OK key to confirm. the temperature of the water. If the TimeManager option is applicable to the selected programme, the display The washing and drying phases are shows the 2 conditions Fast and Normal shorter.
  • Page 14 German de‐ French de‐ mmol/l Clarke de‐ Water softener grees (°dH) grees (°fH) grees level 23 - 28 40 - 50 4.0 - 5.0 28 - 35 19 - 22 33 - 39 3.3 - 3.9 23 - 27...
  • Page 15: Daily Use

    ENGLISH 8.3 The rinse aid dispenser CAUTION! Only use rinse aid The rinse aid helps to dry the dishes specifically designed for without streaks and stains. dishwashers. The rinse aid is automatically released during the hot rinse phase. 1. Open the lid (C). 2.
  • Page 16 There are two ways of lowering the CAUTION! basket depending on the loading: Make sure that items do not • If there is a full load of plates, stick out of the basket frame slightly push the basket down.
  • Page 17 ENGLISH door, the appliance continues from the Starting a programme point of interruption. When you activate the appliance, the If the door is opened for display shows the programme list. The more than 30 seconds programme ECO is always the default during the drying phase, the programme.
  • Page 18: Hints And Tips

    Off, the appliance is automatically 2. Close the water tap. deactivated. 10. HINTS AND TIPS 10.1 General instructions on the detergent packaging. Follow the hints below to ensure optimal cleaning and drying results in daily use 10.3 What to do if you want to and to help you protect the environment.
  • Page 19: Care And Cleaning

    ENGLISH • Make sure that the spray arms can • The programme is suitable to the type move freely before you start a of load and the degree of soil. programme. • The correct quantity of detergent is used. 10.5 Before starting a 10.6 Unloading the baskets programme 1.
  • Page 20 8. Put back the filter (B) in the flat filter (A). Turn it clockwise until it locks. 2. Remove the filter (C) out of filter (B). 3. Remove the flat filter (A). CAUTION! An incorrect position of the filters can cause bad washing results and damage 4.
  • Page 21: Troubleshooting

    ENGLISH 11.3 External cleaning • Clean the appliance with a moist soft cloth. • Only use neutral detergents. • Do not use abrasive products, abrasive cleaning pads or solvents. 11.4 Internal cleaning • Carefully clean the appliance, including the rubber gasket of the door, with a soft damp cloth.
  • Page 22 Problem and alarm code Possible cause and solution The program does not • Make sure that the appliance door is closed. start. • The appliance has started the procedure to recharge the resin inside the water softener. The duration of the procedure is approximately 5 minutes.
  • Page 23 ENGLISH Problem and alarm code Possible cause and solution The appliance trips the cir‐ • The amperage is insufficient to supply simultaneous‐ cuit-beaker. ly all the appliances in use. Check the socket amper‐ age and the capacity of the meter or turn off one of the appliances in use.
  • Page 24 Problem Possible cause and solution The dishes are wet. • For the best drying performance activate the option XtraDry and set AirDry . • The programme does not have a drying phase or has a drying phase with low temperature.
  • Page 25: Technical Information

    ENGLISH Refer to "Before first use", "Daily use" or "Hints and tips" for other possible causes. 13. TECHNICAL INFORMATION Dimensions Width / height / depth 596 / 818 - 898 / 550 (mm) Voltage (V) 200 - 240 Electrical connection Frequency (Hz) 50 / 60 Water supply pressure...
  • Page 26 www.electrolux.com...
  • Page 27 ENGLISH...
  • Page 28 www.electrolux.com/shop...

Table of Contents