Before First Use - Electrolux ESL7845RA User Manual

7.4 TimeManager
This option increases the pressure and
the temperature of the water.
The washing and drying phases are
shorter. The total programme duration
decreases by approximately 50%.
The washing results are the same as
with the normal programme duration but
the drying results can be less
satisfactory.
The TimeManager option is not
applicable to all programmes.

8. BEFORE FIRST USE

The first time you activate the appliance
it is necessary to set the language.
Default language is English.
1. Set the language.
• Press OK to confirm English.
• Scroll the list of available
languages for a new language
and press OK to confirm.
2. Make sure that the current level of
the water softener agrees with the
hardness of the water supply. If
not, adjust the level of the water
softener.
3. Fill the salt container.
4. Fill the rinse aid dispenser.
5. Open the water tap.
6. Start a programme to remove any
processing residuals that can still be
inside the appliance. Do not use
detergent and do not load the
baskets.
When you start a programme, the
appliance can take up to 5 minutes to
Water hardness
German de‐
grees (°dH)
47 - 50
43 - 46
37 - 42
29 - 36
French de‐
grees (°fH)
84 - 90 8.4 - 9.0
76 - 83 7.6 - 8.3
65 - 75 6.5 - 7.5
51 - 64 5.1 - 6.4
1. Scroll through the programme list
and select a programme.
2. Press the OK key to confirm.
If the TimeManager option is applicable
to the selected programme, the display
shows the 2 conditions Fast and Normal
and the programme duration for each
condition:
• Fast: TimeManager activated.
Press the OK key to confirm.
• Normal: TimeManager
deactivated. Press the OK key to
confirm.
recharge the resin in the water softener.
It seems that the appliance is not
working. The washing phase starts only
after this procedure is completed. The
procedure will be repeated periodically.
8.1 The water softener
The water softener removes minerals
from the water supply, which would have
a detrimental effect on the washing
results and on the appliance.
The higher the content of these minerals,
the harder your water is. Water hardness
is measured in equivalent scales.
The water softener should be adjusted
according to the hardness of the water in
your area. Your local water authority can
advise you on the hardness of the water
in your area. It is important to set the
right level of the water softener to assure
good washing results.
mmol/l Clarke de‐
grees
58 - 63
53 - 57
46 - 52
36 - 45
ENGLISH 13
Water softener
level
10
9
8
7