Electrolux ESL7845RA User Manual page 12

Hide thumbs Also See for ESL7845RA:
Table of Contents

Advertisement

12
www.electrolux.com
If an option is not applicable
to a programme, the related
indicator is off or it flashes
quickly for a few seconds
and then goes out.
7.1 Option list
Options
Delay start
XtraDry
TimeManager
Settings
7.2 How to set an option
The option list will show only the options
applicable to the currently selected
programme. Non applicable options are
not visible.
Some options are not compatible with
each other. When you set 2 options that
are not compatible with each other, the
appliance will automatically deactivate
one of the options.
When the programme is completed or is
cancelled the options are set to the
default values.
1. Press the Option key.
2. Select an option.
The display shows the option value
indicated in parenthesis.
3. Press the OK key to change the
value from OFF to ON or vice versa.
If the selected option is Delay start, when
you press the OK key the display shows
the number of hours available for the
delay start. Select the number of hours
and press again the OK key to confirm.
Values
From 1 to 24 hours
OFF (default value)
ON
OFF (default value)
Fast
Normal (default value)
Enter appliance settings
Activating options can affect
the water and energy
consumption as well as the
programme duration.
Description
The use of this option de‐
lays the start of the pro‐
gramme.
The use of this option
boosts the drying perform‐
ance. Refer to specific in‐
formation provided in this
chapter.
The use of this option de‐
creases the duration of the
washing and drying phases
by approximately 50%. Re‐
fer to specific information
provided in this chapter.
4. To go back to the programme list,
press repeatedly the Option key until
the display shows the selected
programme.
7.3 XtraDry
Activate this option to boost the drying
performance.
XtraDry is a permanent option for all
programmes other than Eco 50°. It is
automatically activated in next cycles.
This configuration can be changed at any
time.
Every time Eco 50° is
activated, XtraDry is off and
needs to be chosen
manually.
Activating XtraDry deactivates
TimeManager and vice versa.

Advertisement

Table of Contents
loading

Table of Contents