Calling Starter - Siemens Sinamics S120 Getting Started

7. Set the IP address of the access interface of the PG/PC to the Control Unit to
169.254.11.1 and the subnet mask to 255.255.0.0.
Image 5-1
8. Click "OK" and close the Windows-specific window of the network connections.
5.2.2

Calling STARTER

Note
The following procedure refers to the Windows 7 operating system. Operation can differ
slightly for other operating systems (e.g. Windows XP).
1. Click on the STARTER symbol
Or
2. In the Windows starting menu, call the menu command "Start > STARTER > STARTER".
STARTER Getting Started
Getting Started, (GS1) 07/2016, 6SL3097-4AG00-0BP4
Example: IPv4 address of the PG/PC
of your user interface.
Creating a drive object
5.2 Setting the communication interfaces
35