Siemens Sinamics S120 Getting Started page 44

Configuring the drive object
6.1 Configuring the drive unit
7. Click on button "Create".
The automatic configuration process commences. When the process has been
completed, a window with the message "Automatic configuration is complete" opens.
Image 6-5
Note
The above message appears because two drives are integrated in the training case. For
our example configuration, however, we only put one drive into operation.
8. Click on the button "Stay ONLINE."
44
Automatic configuration, stay online
Getting Started, (GS1) 07/2016, 6SL3097-4AG00-0BP4
STARTER Getting Started