Introduction; Feature - Wiznet WIZ810Sio User Manual

Introduction

1.
WIZ810Sio is the internet offload network module that includes W5100S (TCP/IP
hardwired chip, include PHY), MAG-JACK (RJ45 with X'FMR) with other glue logics.
It can be used as a component and no effort is required to interface W5100S and
Transformer.
The WIZ810Sio is an ideal option for users who want to develop their Internet
enabling systems rapidly.
For the detailed information on implementation of Hardware TCP/IP, refer
to the W5100S Datasheet.
WIZ810Sio consists of W5100S and MAG-JACK.
TCP/IP, Ethernet MAC : W5100S
⚫
Ethernet PHY : Included in W5100S
⚫
Connector : MAG-JACK(RJ45 with Transformer)
⚫

1.1. Feature

Support Hardwired Internet protocols
⚫
: TCP, UDP, WOL over UDP, ICMP, IGMPv1/v2, IPv4, ARP, PPPoE
Support 4 independent SOCKETs simultaneously
⚫
Supports half/full duplex operation
⚫
Support SOCKET-less command
⚫
: ARP-Request, PING-Request
Support Ethernet Power down mode & Main Clock gating for power save
⚫
Support Wake on LAN over UDP
⚫
Supports high speed SPI Interface (SPI mode 0/3)
⚫
Internal 16Kbytes Memory for TX/ RX Buffers
⚫
10BaseT/100BaseTX Ethernet PHY Integrated
⚫
Support Auto Negotiation (Full and half duplex, 10 and 100-based )
⚫
Supports Wake On LAN
⚫
Support Auto-MDIX only when Auto-Negotiation mode
⚫
3.3V operation with 5V I/O signal tolerance
⚫
Interfaces with two 2.54mm pitch 1 x 6 header pin
⚫
Very small form factor: 23mm x 25mm (PCB size)
⚫
WIZ810Sio User Manual (WIZnet Co.,Ltd.)
4