3�3� Plumbing - Calorex I-PAC Series Owners & Installation Manual

OWNER/INSTALLATION MANUAL
3�3� PLUMBING
IMPORTANT
Before installing the heat pump ensure the
blanking disks are removed from the pool water
in/out connections� These should drop out when
the adaptors are unscrewed�
1. Ensure that bypass is installed and set to achieve
the recommended flow rates stated in the data
sheet.
2. Ensure that the condensate drain kit supplied is
fixed and is drained to a drain or soak-away.
(It is best to do this first before the heat pump
is fixed to pipework or the ground)�
Water
out
Water
in
Hose. Condensate adaptor.
Fit in hole in base of unit.
Approximate position shown.
Note: Fittings shown at larger scale for clarity.
12
3. Inlet and outlet pipework must be supported to
avoid excessive strain on the connections.
x

x
1005494 ISS 1