Shield Cover (28), And Orient Them As Shown - NordicTrack SE 3i User Manual

4. With the help of a second person, raise the
Upright (2) to the vertical position.
Secure the Upright (2) to the Frame (1) with an
M10 x 75mm Bolt (61), an M10 x 80mm Bolt
(86), and two M10 Locknuts (62); insert both
Bolts, and then tighten the Locknuts.
Then, tighten the indicated M10 Locknut (A).
5. Identify the Rear Shield Cover (27) and the Front

Shield Cover (28), and orient them as shown.

Press the Rear and Front Shield Covers (27, 28)
together around the Upright (2), slide them
downward, and press them onto the Left and
Right Shields (30, 31).
6. Attach the Rear Upright Cover (25) to the Upright
(2) with three M4 x 16mm Screws (78); start all
the Screws, and then tighten them.
Then, insert the Accessory Tray (24) into the
Rear Upright Cover (25).
4
5
6
24
25
78
8
2
62
61
A
62
1
2
27
28
30
31
78
2
86