PART IDENTIFICATION CHART
Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the
key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it
has been preassembled. Extra parts may be included.
M10 Locknut
M8 Washer
(62)–2
(83)–2
M4 x 16mm
M4 x 10mm
M4 x 12mm
M4 x 16mm
Machine
Screw (95)–4
Screw (77)–4
Screw (78)–15
Screw (94)–4
M8 x 20mm
M8 x 76mm Shoulder Screw (63)—2
Screw (84)–2
M10 x 15mm
M10 x 20mm
M10 x 75mm Bolt (61)–1
Screw (67)–6
Screw (79)–3
M10 x 80mm Bolt (86)–1
M10 x 82mm Screw (70)–4
5