Spectrum 37135 Assembly Instructions

Assembly Instructions Assembly Instructions
Important
Before you begin, read and comply with all safety and operating instructions,
and ensure all parts and correct quantities are included.
Any parts damaged during shipment must be reported within 5 days of receipt.
To report information regarding missing parts or damage, to purchase parts
or accessories, or if you have any questions, please contact us.
www.spectrumfurniture.com
800-235-1262, 715-723-6750
Thank you for purchasing Spectrum products!
(2) 013250 (1) 0134807
Side panel Back panel
(1) 0134837 (2) 0135232
Internal shelf Side bin
(4) 026073 (4) 026064
#8 x 3/4" PHSM 1/4-20 x 5/8" PHM
1. Assemble cabinet
1. Attach the side panels to the rear panel with
(4) #8 x 3/8" PHSM screws. Figure 1.1.
l
a n e
e p
S i d
(1) 0135328
Door assembly
(2) 0119468
Recessed bumper
with washer
(14) 0190174
#8 x 3/8" PHSM
#8 x 3/8" PHSM screws
(4 required)
B a
c k
p a n
e l
l
a n e
e p
S i d
Figure 1.1
Locking Cabinet for 3D2GO
Note: The Locking Cabinet is not compatible
with the 37136 Adjustable Shelf.
(2) 059984
2" Grommet
2. Install (2) 2" grommets in the back panel.
Figure 1.2.
™
Printer Cart
37135
2" Grommet
0190574 Page 1 of 2
Phillips
Screwdriver
Figure 1.2