Table of Contents
Advertisement
Quick Links
Assembly Instructions
Assembly Instructions
Assembly Instructions
Assembly Instructions
Important
Before you begin, read and comply with all safety and operating instructions,
and ensure all parts and correct quantities are included.
Any parts damaged during shipment must be reported within 5 days of receipt.
To report information regarding missing parts or damage, to purchase parts
or accessories, or if you have any questions, please contact us.
www.spectrumfurniture.com
800-235-1262, 715-723-6750
Thank you for purchasing Spectrum products!
(1) Worksurface
(1) 0152138
Cord channel
front
(1) 0152137
Cord channel
bottom
(1) 0151223
Left Leg
Meta Bank
worksurface
Esports Meta Bank Desk - 37340
Esports Meta Bank Desk - 37340
Esports Shadow Bank Desk - 37341
Esports Shadow Bank Desk - 37341
Shadow Bank
worksurface
(1) 0154472
Support panel
(1) 0151501
Right Leg
Assembly tip: Do not tighten component fasteners completely
until all have been installed. Keeping them loose will help with
alignment between parts during assembly.
3
7
/
/
"
"
8
16
0192096R1 Page 1 of 8
Advertisement
Table of Contents
Related Manuals for Spectrum Esports Meta 37340
Summary of Contents for Spectrum Esports Meta 37340
- Page 1 To report information regarding missing parts or damage, to purchase parts or accessories, or if you have any questions, please contact us. www.spectrumfurniture.com 800-235-1262, 715-723-6750 Thank you for purchasing Spectrum products! (1) Worksurface Meta Bank worksurface Esports Meta Bank Desk - 37340...
- Page 2 Hardware (24) 0100167 (3) 035728 (1) 021521 8-32 x 1/2” PH Thrd ctg 1/4-20 x 1/2” PHMS 10-24 Keps nut (15) 038064 (7) 037542 (1) 025069 #14 x 3/4” PHSM #8 x 5/8” PHSM Glide Wrench (1) 0152128 (2) 026069 (4) 0190419 Mid bracket #8 x 5/8”...
- Page 3 1. Assemble worksurface 1. Assemble worksurface 1. Place both worksurfaces laminate side-down as shown onto a non- abrasive surface like a carpeted floor. Figure 1. 2. Attach the mid bracket to the secondary worksurface as shown with Tilt bracket (1) #14 x 3/4” PHSM screw. 3.
- Page 4 3. Attach bumpers to top of each leg 3. Attach bumpers to top of each leg 4. Attach glides to bottom of each leg 4. Attach glides to bottom of each leg 1. Attach (2) recessed bumpers to the top of each leg in the positions 1.
- Page 5 6. Attach tilting hardware 6. Attach tilting hardware Attach latch bracket #1 to the leg with (2) 8-32 x 1/2” PH Slide spring over latch and insert latch into bracket slot and hold. thread-cutting screws. Figure 6.1. Figure 6.2. Latch bracket #1 Latch 8-32 x 1/2”...
- Page 6 7. Attach cable eyelets 7. Attach cable eyelets 1. Screw in the eyelet as shown. Figure 7. 2. Orient the eyelet vertically. 3. Repeat with eyelet on other leg. Eyelet Figure 7 8. Attach cable 8. Attach cable 1. Attach the (2) 5/16” x 15/16” clamps to the worksurface with #8 x 5/8” PHSM screws as shown.
- Page 7 9. Attach cord channel 9. Attach cord channel 1. Align the cord channel front with the leg holes and mid bracket as shown. Figure 9.1. Secure with (2) 8-32 x 1/2” PH thread-cutting screws and (1) 10-24 Keps nut at the mid bracket. 8-32 x 1/2”...
- Page 8 925 FIRST AVENUE, CHIPPEWA FALLS, WI 54729 / 800-235-1262 / 715-723-6750 / WWW.SPECTRUMFURNITURE.COM 925 FIRST AVENUE, CHIPPEWA FALLS, WI 54729 / 800-235-1262 / 715-723-6750 / WWW.SPECTRUMFURNITURE.COM © 2021 Spectrum Industries Inc., All rights reserved. 0192096R1 Page 8 of 8...
Need help?
Do you have a question about the Esports Meta 37340 and is the answer not in the manual?
Questions and answers