Table of Contents
Advertisement
Quick Links
CORDLESS
FINISHING
GRINDER
18V Li-ion
INSTRUCTION MANUAL
SPECIFICATIONS
Input:
18V
No Load Speed:
6000 / min
Disc Diameter:
100mm (4")
Spindle Size:
M10
Battery Power:
1.3Ah Li-ion
Charge Time:
3 - 5 Hours
Weight:
2 kg
ozito.com.au
WHAT'S IN THE BOX
Angle Grinder
18V Battery x 2
Pin Spanner
Allen Key
Charging Cradle
Charging Adaptor
LFG-4100
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Ozito LFG-4100
Summary of Contents for Ozito LFG-4100
- Page 1 18V Li-ion Pin Spanner INSTRUCTION MANUAL SPECIFICATIONS Allen Key Input: No Load Speed: 6000 / min Disc Diameter: 100mm (4”) Spindle Size: Battery Power: 1.3Ah Li-ion Charge Time: 3 - 5 Hours Charging Cradle Weight: 2 kg ozito.com.au Charging Adaptor LFG-4100...
-
Page 2: Know Your Product
KNOW YOUR PRODUCT SETUP & PREPARATION CORDLESS FINISHING GRINDER 1. BATTERY 1. Spindle Lock 4 Lock On Slide Switch This charger is recommended for use with a residual current 2. Adjustable Safety Guard 5 Battery Release Button device with a rated residual current of 30mA or less. 3. - Page 3 3. GRINDING DISC 2. SIDE HANDLE & GUARD Side Handle The side handle can be fitted on either side of your grinder. The correct position will be determined by your preferred hand and the Inspect the grinding disc before fitment to ensure it is not cracked operation being performed.
-
Page 4: Operation
2. To turn the grinder off, push down on the rear of the switch. 3. Begin grinding your workpiece. The optimum grinding angle is 10-15° to the workpiece. Do not apply excessive pressure. Allow the tool to do the work. This will prevent deep gouging. 10-15° LFG-4100... -
Page 5: Maintenance
Electrical Emissions Transformer Energy Conformity (EMC) Rating (MEPS) Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of the finishing grinder by an unauthorised person or by mishandling of Read instruction manual Warning the finishing grinder. - Page 6 Tool: 18V Li-ion Finishing Grinder SPARE PARTS Model No. LFG-4100 22 21 18 17 39,40 42,43,44 48,49,50 The following is a list of spare parts carried by Ozito. Please contact Customer Service for any parts not listed. Item Item Description Part No. Description Part No.
-
Page 7: Electrical Safety
Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. Using an Extension Lead This tools charger is double insulated in accordance with AS/NZS 60335-1;... -
Page 8: Warranty
• Failure to perform maintenance as set out within the instruction manual. • If the tool is disassembled or tampered with in any way. OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175. 0513...
Need help?
Do you have a question about the LFG-4100 and is the answer not in the manual?
Questions and answers