Before First Use - Silvercrest SWR 1000 A1 Operating Instructions Manual

Before first use
■ Before starting to use the appliance, ensure that the appliance, the plug and
the cable are in a fault-free condition and that all packaging materials are
removed from the appliance.
■ First of all, clean the appliance as described in "Cleaning and Care".
■ To open the appliance, pull the safety catch
lid by the handle
■ Lightly grease the baking surfaces with an oil suitable for baking/grilling.
This will make it easier to remove any manufacturing-related residue from the
baking surfaces.
■ Heat up the appliance to maximum temperature for a short time with the lid
closed:
–
–
NOTE
► The green control lamp
this process. This indicates that the temperature has briefly fallen and
the appliance is heating itself back up. This is not a malfunction of the
appliance!
–
■ Clean the appliance again as described in "Cleaning and Care".
The waffle iron is now ready for use.
SWR 1000 A1
at the same time.
NOTE
► During first use, you may notice a slight smell (there may also be minimal
smoke). This is normal and dissipates after a short time. Ensure sufficient
ventilation. For instance, by opening a window.
Insert the plug into the mains power socket. The red control lamp
lights up as soon as the appliance is connected to the mains.
Wait until the green control lamp
is heated-up.
Pull out the plug and allow the appliance to cool down.
forwards a little and lift the
lights up. This shows that the appliance
can come on and go out several times during
│ 7 ■
GB