Electronics Line SecuPlace Quick User Manual page 13

Telephone "Telecontrol" Commands
To use Telecontrol commands:
1. Call the phone (regular or cellular) that is connected to the
control panel at the premises:
[Regular phone]: Wait for 3 rings and hang up. Then wait
•
at least 5 seconds and dial the number again – after the
second ring the system answers and 2 tones are sounded.
[Cell phone]: Wait until the system answers and 2 tones
•
are sounded.
2. Within 15 seconds, enter 29 (Telecontrol code), and after a
tone sounds, select the operation you wish to perform:
Press
then
Function
Enable Two-Way Audio (TWA)
Fully arm system
Disarm system
Cancel sounder
Extend call duration
Disconnect call
13