Cleaning The Dust Boots Of The Fork Legs; Removing The Fork Protector - KTM 250 EXC TPI Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.4
12.5
66

Cleaning the dust boots of the fork legs

K00070-10

Removing the fork protector

V00332-10
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the fork protector. (
Main work
–
1
Push dust boots of both fork legs downward.
Info
The dust boots remove dust and coarse dirt particles
from the inside fork tubes. Over time, dirt can accumu-
late behind the dust boots. If this dirt is not removed,
the oil seals behind can start to leak.
Warning
Danger of accidents Oil or grease on the brake discs
reduces the braking effect.
–
Always keep the brake discs free of oil and grease.
–
Clean the brake discs with brake cleaner when nec-
essary.
–
Clean and oil the dust boots and inner fork tubes of both fork
legs.
Universal oil spray ( p. 169)
–
Press the dust boots back into their installation position.
–
Remove excess oil.
Finishing work
–
Install the fork protector. (
–
Remove the motorcycle from the lift stand. (
–
1
Remove screws and take off the clamp.
–
2
Remove screws and take off the left fork protector.
–
3
Remove screws and take off the right fork protector.
p. 65)
p. 66)
p. 67)
p. 65)