Installing The Front Wheel - KTM 250 EXC TPI Owner's Manual

14.2

Installing the front wheel

Warning
Danger of accidents Oil or grease on the brake discs reduces the braking effect.
–
Always keep the brake discs free of oil and grease.
–
Clean the brake discs with brake cleaner when necessary.
(300 EXC Erzberg Edition TPI EU)
–
Remove spacer
H01890-10
(All Standard and Six Days models)
–
Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
–
Change front wheel bearing.
–
Clean and grease shaft seal rings
A
face
Long-life grease (
–
Insert the spacers.
H00935-10
–
Clean and grease the wheel spindle.
Long-life grease (
–
Jack up the front wheel into the fork, position it, and insert
the wheel spindle.
The brake linings are correctly positioned.
(300 EXC Erzberg Edition TPI EU)
–
Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
–
Change front wheel bearing.
–
Clean and grease shaft seal rings
A
faces
Long-life grease (
–
Insert the spacer and brake disc guard.
S01631-10
–
Clean and grease the wheel spindle.
Long-life grease (
–
Position the front wheel and insert the wheel spindle.
The brake linings are correctly positioned.
3
and brake disc guard
1
and contact sur-
of the spacers.
p. 168)
p. 168)
1
and contact sur-
of the spacers.
p. 168)
p. 168)
WHEELS, TIRES 14
4
.
111