Table of Contents
Advertisement
English (GB) Installation and operating instructions
Original installation and operating instructions.
CONTENTS
1.
2.
2.1
2.2
2.3
2.4
2.5
2.6
2.7
3.
3.1
4.
4.1
4.2
4.3
5.
5.1
5.2
5.3
5.4
6.
6.1
6.2
6.3
6.4
7.
7.1
7.2
7.3
7.4
8.
8.1
9.
9.1
10.
11.
12.
13.
Warning
Prior to installation, read these installation and
operating instructions. Installation and operation
must comply with local regulations and accepted
codes of good practice.
1. Symbols used in this document
Warning
Page
If these safety instructions are not observed,
it may result in personal injury.
3
3
If these safety instructions are not observed,
3
Caution
it may result in malfunction or damage to the
4
equipment.
4
4
Warning
4
The sound pressure level is so high that hearing
4
protection must be used.
4
5
Notes or instructions that make the job easier
5
Note
and ensure safe operation.
5
5
2. Product introduction
8
10
Grundfos BMS, BMST and BMSX booster systems are designed
for desalination of seawater or brackish water in reverse osmosis
11
systems, the so-called SWRO systems (SWRO = Sea Water
11
Reverse Osmosis). The design of the systems ensure high
11
energy recovery.
11
11
2.1 Delivery and handling
11
11
During delivery and storage, the pumps must
12
never be preserved with glycerine or similar
Caution
13
liquids which are aggressive to the pump
15
materials.
15
2.1.1 Delivery
15
The pumps are supplied from the factory in proper packing in
16
which they should remain until installation.
16
17
2.1.2 Frost protection
If the pumps have to be stored, the location must be frost-free.
17
17
17
17
18
18
19
20
21
22
22
3
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the BMST Series and is the answer not in the manual?