Better Homes and Gardens Steele Series Assembly Manual page 17

17. Plug the Cam Lock Covers (9) onto the visible Cams Locks to conceal the Cams.
18. Insert the assembled drawer into the frame. Extend the Ball Bearing Slide Tracks on the Side Panels (B
and C) all the way forward (including ball bearing cart). Then align the Slide Runners on the assembled
drawer with the Slide Tracks and push the drawer carefully inside until it stops.
NOTE: If the drawer does not go in smoothly, please take it out and repeat the step. If you need to
remove the drawer, please pull the drawer all the way out, then simultaneously push the plastic release
lever of the ball bearing slides up on one side and down on the other side, and then pull it completely
out.
Assembly Instructions
B
Cam Lock Cover
(4 used in this step)
17
C
K
J I
⑨
9