Screen Brightness Control; Keyboard Volume Control; Keyboard Click Sound Control; Communications Port Baud Rate Selection - OTRONA ATTACHE Series Manual

Introduction
The complete list of Valet functions is as follows:
Set-up Mode
Date and Time Display
Communications Port Baud Rate Selection
Screen Brightness Control Printer Port Baud Rate Selection
Keyboard Volume Control Bell Sound Control
Keyboard Click Sound Control Access to Valet Main Menu
Main Menu
Alarm and Message Scheduling
Screen Dump to Print Screen Contents
Four-Function RPN Calculator Printer Installation for Screen Dump
Two Valet files are included on the Attache Software diskette. These
files are named VALET.VLI and PRINTER.VLl on the disk. Some Valet
functions require that these files are on the diskette inserted in Drive
A a t all times, while other Valet functions w ill work properly even if
the files are not on the system diskette.
The VALET.VLI file contains programs for alarms, screen dump, printer
install, and calculator. These programs will only work if the VALET.VLI
file is on the diskette inserted in Drive A.
If an alarm is scheduled and the Valet.VLI file is not in Drive A when
the alarm is set to sound, the alarm will be ignored. However, if the
alarm is set to sound when Attache is turned off, the alarm will sound
when the unit is powered up and booted with the VALET.VLI file on the
diskette in Drive
&
The PRINTER.VLI file provides printer settings for the install function.
The calculator, alarm, and screen dump programs will function properly
even if PRINTER.VI,1 is not included on the diskette in Drive A.
Once a printer has been selected, the selection is inserted in the screen
dump progJ:"ams in the VALET.VLI file. PRINTER.VLl is not required again
unless you want to change printer selection for the screen dump.
Set-up Mode will function properly even
i f
VALET.VLI and PRINTER.VLI are
not on the diskette in Drive A when the function is activated.
1-2