OTRONA ATTACHE Series Manual page 32

Screen Dump
When Set-Up Mode has been activated, graphics characters are
"undisplayed" on the screen. Do not be alarmed by this. Graphics
character swill still be pr inted and will be redi splayed when you exi t
from Valet.
M A I N II
(A)LARMS (C)ALCULATOR (S)CREHN DUMP (I) NSTALL
MEN
U
I I
PRESS FSC TO EXIT
From the Main Menu, select option S for Screen Dump. The Print Menu will
then appear on the bottom two lines of the screen, wi th your installed
printer selection identified at the left side of the first row.
Note: prior to making a selection from the Print Menu, you can send line
feeds to the printer to align the paper properly by pressing LINE FEED.
E P SON
I I (Q)UICK TEXT
(T)EXT ONLY (G)RAPHICS ONLY
PRINT MENU
II
(E)
NTIRE SCREEN PRESS ESC
TO
EXIT
Type the letter that corresponds with your desired option, or press ESC
to return to Valet's Main Menu without printing.
The contents of the screen will be printed according to the option that
was selected. The Main Menu appears on the screen when printing is
completed. You may then select an option from that menu to continue
Valet processing or press ESC to return to the interrupted program.
BVpassing .the
.ftin.t
.MeIw
When you are familiar with the options provided by the Print Menu, you
can bypass this menu and Valet's Main Menu and go directly from Set-up
Mode to the desired function by typing the letters that would activate
Screen Dump's Print Menu (S) and your option, such as Q for Quick Text or
G
for Graphics Only.
For example,
you
can activate the "Quick Text" option for Screen Dump by
pressing CTRL and ESC simultaneously and then Sand Q in sequence without
waiting for the menus to be displayed.
4-2