Scheduling Messages - OTRONA ATTACHE Series Manual

Alarms
Scheduling Messages
At the prompt to ENTER ALARII TYPE, type M to enter a message. The cursor
appears at the first line of the message entry screen. TVpe the message,
using both lines if necessary.
mTER
MESSAGE:
I I
11:10:00 10/15
I I
Press ESC when you are finished and the display returns to the Alarm
Menu. Then press ESC to return to the Main Menu, and ESC again to return
to the program that was interrupted
bV
Valet processing.
The message that was typed here will appear at the bottom of the display
screen at the scheduled time when you respond to the alarm.
Scheduling cmma
nd ~
At the prompt to ENTER ALARM TYPE, type C to enter a command line. The
cursor appears at the first line of the message entry screen. Tvpe the
command. Use SUBMIT to chain more than one command
i f
desirable.
ENTER COMMAND:
I I
11:10:00 10/15
I I
Press ESC when you are finished and the display returns to the Alarm
Menu. Then press ESC to return to the Main Menu, and ESC again to return
to the program that was interrupted for Valet processing.
The command that was typed here will appear at the bottom of the display
screen at the scheduled time when you respond to the alarm. You may then
reschedule the command line for a later time or allow it to execute as
originally scheduled.
3-5
•