OTRONA ATTACHE Series Manual page 13

Set-Up Mode
~
Brightness Control
To increase the screen brightness, activate Set-Up Mode and press 1. To
reduce the screen brightness, press 2. Keep pressing for more or less
brightness. Press ESC to return to the previous function.
Kevboard~
Control
To increase the keyboard click volume, activate Set-up Mode and press
3.,
To reduce the keyboard volume, press 4. Keep pressing for more or less
volUme. Press ESC to return to the previous function.
Kevboard
~ ~
Control
To change the keyboard click sound, activate Set-up Mode and press 5. A
different click w ill be heard each time the key is pressed. Four
different clicks are available, or you may turn the click sound off
altogether. Press ESC to return to the previous function.
Communications ~ ~ ~ Selection
To change the baud rate for the communications port, activate Set-up
Mode and press 6 to increase the baud rate or 7 to decrease the baud
rate. The setting will be increased or decreased by one increment each
time the key is pressed. Press ESC to return to the previous function.
Baud Rate Selections for Attache Serial Ports
19200
9600 4800 2400 1200
600
300
150 134.5
110
7 5
Printer
~ ~ ~
Selection
To change the baud rate for the printer port, activate Set-up Mode and
press 8 to increase the baud rate or 9 to decrease the baud rate. The
setting will be increased or decreased by one increment each time the key
is pressed. Press ESC to return to the previous function •
.B.ell
~ Control
To turn the keyboard bell on or off, activate set-up Mode and press O.
If
the bell is set to off it w ill change to on and vice ver sa. Press ESC
to return to the previous function.
2-3
•