OTRONA ATTACHE Series Manual page 11

Set-Up Mode
Set-up Mode controls functions on the top row of the keyboard template,
displays the date and time, and provides access to the valet Menu.
set-up Mode may be activated at any time when the unit is powered up and
CP/M has been booted, even while other programs are being used. The
program that is interrupted remains on the screen while Set-up Mode is
activated. The screen returns to its previous function when you exit from
Set-up Mode.
Values that you set in Set-up Mode remain constant until you change them,
even if the unit is powered down for long periods of time.
To use Set-up Mode:
1.
Press
C'.rRL
and
ESC
at the same time. The Set-Up Mode display will
appear on the bottom two rows of the screen.
TIME
13: 52: 26
DATE BRIGHTNESS VOLUME KEY COMMUNICATIONS PRINTER BELL
10/14 27 8 BEEPl 2400 1200 ON
2a.
Press the number key that corresponds to the specific operation you
want to perform, as described on the top row of the keyboard
template and displayed at the bottom of the Set-Up Mode screen,
or • ••
2b. Press
TAB
if you want to display the Valet Menu.
3. Press
ESC
again to exit Set-Up Mode and return the screen to its
previous function.
2-1
I