Table of Contents
Advertisement
Printer Installation
~ ~
Install Program
To select a printer for printing graphics, activate Set-up Mode and press
the TAB key to display Valet's Main Menu.
M A I N II
(A)LARMS
(C)ALCULATOR
(S)CREEN DUMP
(I)NSTALL
MEN
U
II
PRESS ESC
TO
EXIT
From Valet's Main Menu, select option I to install a printer.
The
first Install Menu will then appear on the screen. Three printers are
displayed on this menu (Epson, Axiom, and Okidata 83A).
INSTALL
MENU
II
II
(E)PSON
(N)EXT MENU
(A) XIOM
(0.) KI 83A
. PRESS ESC TO EXIT
The Anadex, C. Itoh, and Okidata 84 printers are installed by selecting
the Next Menu option on the Install menu and then selecting the printer
from the menu that is displayed.
INSTALL
MENU
II
II
(A)NADEX
(C).ITOH
(0)KI-84
(F) IRST MENU
PRESS ESC
TO
EXIT
Type the letter shown in parenthesis for your printer selection and then
press ESC to return to the Main Menu.
You may then select an option from
that menu to continue Valet processing or press ESC again to return to
the interrupted program.
Note: your printer selection will appear for verification on the Print
Menu when screen dump is accessed from Valet's Main Menu.
BVpassing .the .Main
.IIeml
When
you
are familiar with the options provided by the Install Menu, you
can bypass this menu and Valet's Main Menu and go directly from Set-Up
Mode to the desired function by typing the letters that would activate
the Install Menu (1) and your option, such as E for Epson or A for Axiom.
5-2
Advertisement
Chapters
Table of Contents
