OTRONA ATTACHE Series Manual page 25

Alarms
The screen will then display the message or command line and prompt NEW
MESSAGE?
or
NEW COMMAND?
If you do not want to change the message or
command, type N to return to the Alarm Menu.
To change the message or command line, type Y at the prompt for
NEW
MESSAGE?
or NEW
COMMARD?
The next display on the screen will be the
prompt for alarm type. From this screen, you may change the alarm type
or press
REmORN
to retain the same alarm type as before.
NEW MESSAGE?
10: 01: 05 10/22
II
MEETING W/ J. JACKSCN AT lOAM
I I
BRING MANUSCRIPTS
AND ARTWORK
When the message screen appears, type your new message or command line
and press
ESC
to return to the Alarm Menu. Then press
ESC
to return to
the Main Menu, and
ESC
again to return to the program that was
interrupted for Valet.
Cancelling
Al.acIw
Alarms are automatically cancelled or "cleared" if you respond at the
scheduled time and elect to not reschedule them. Messages are cleared
from the system and command lines begin program execution and then clear.
Alarms may be cancelled in advance by selecting the
C
option from the
Alarm Menu.
A
L
ARM
II
(S) ET (R) EVIEW
(C)AN<EL
MEN U
I I
PRESS ESC TO EXIT
II
II
ALARMS IN
USE
The screen prompts for the alarm number to cancel and then prompts again
CANCEL (Y)ES OR (N)O?
ENTER ALARM NUMBER: CAReD. (Y)ES OR (N)O:
14:20:20 10/22
Type Y to cancel the alarm or N to return to the Alarm Menu without
cancelling the alarm.
3-10