OTRONA ATTACHE Series Manual page 54

A>
Alarms
Alarm Menu
Alarm Nmnber
Alarm Scheduling
Alarm Type
B)
BACK
SPACE
Key
Baud Rates
Bell
Boot
Brightness
Glossarv
Glossarv
Prompt which appears at the first column of a line
on the screen to indicate that Drive A is logged and
waiting for a command.
Valet feature that allows you to schedule messages
or commands for automatic retrieval and display at a
spec if ied time.
Menu that is used to access Valet's Alarm functions.
A number from 1 to 6 that identifies a specific
alarm (either scheduled or available).
The process of setting an alarm for automatic
retrieval and display at a specified time.
Indicates the type of alarm (Message, Command Line,
or Immedia te Command Line).
Prompt which appears at the first column of a line
on the screen to indicate that Drive
B
is logged and
I
waiting for a command.
Moves the cursor one column to the left on the line
and deletes the character at that position.
The number of bi ts per second transmitted between
two electronic devices.
The Set-up Mode fUnction tha.t activates or
deactivates a software controlled bell sound.
The loading of CP/M programs and/or execution of
diagnostic programs that occur when Attache is
powered up.
The Set-Up Mode function that allows the brightness
of the display screen to be adjusted up or down.
7-1