Alignment And Scan Direction - Ametek LAND LSP HD Series User Manual

LSP Linescanner Head User Guide
HD

2.5 Alignment and Scan Direction

Each AMETEK Land LSP Head has an integral laser unit that can be used to help align
HD
the scanner during installation. For instructions on how to use the laser alignment unit,
refer to Section 4.0 of this User Guide.
To interpret the scan profile produced by the scanner, the scan direction of the unit must
be known. The scan direction is indicated by an embossed arrowhead cast into the top
of the scanner casing (See Fig. 4 overleaf).
The design of the scanner mountings ensures that the scanner will always be replaced in
the correct orientation, should the scanner be removed from the application for servicing
etc.
Product Pass Direction
Product
Scan Direction Arrowhead
Scan Direction
LSP Scanner
Fig. 4 Scan Direction
Page 14