Laser Alignment - Ametek LAND LSP HD Series User Manual

User Guide
4 Laser Alignment
WARNING
CLASS 2 Laser Product.
DO NOT stare into laser beam. (1.0 mW maximum output at 635 nm)
DO NOT look directly towards the scanner window, or into the laser beam
during operation.
If the laser is projected onto a highly reflective surface, DO NOT look at the
laser stripe from a position where a direct ('mirror-like') reflection may enter
the eye.
WARNING
CLASS 2 Laser Product.
DO NOT attempt to disassemble the laser unit or any of its mounting
components.
Embedded laser has a maximum output of 3mW with a beam divergence of
<5mrad.
CAUTION
Caution - use of controls or adjustments or performance of procedures other
than those specified herein may result in hazardous radiation exposure.
Laser
Specification
Label
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
1mW MAX OUTPUT AT 635nm
Side View
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
1mW MAX OUTPUT AT 635nm
IEC60825 -1: 2001
LASER RADIATION
IEC 60825-1:2001
Fig. 6 Laser Warnings
LSP
HD
Top View
Bottom View
IMPORTANT: Please note radiation
safety warning, where this symbol
appears
Linescanner Head
Laser Warning
Label
Laser Beam
Projection
Window
Page 19