Editing Parameters; Selecting The Parameter Setting - BARTEC BENKE HYGROPHIL F 5673 Operating Manual

Programming
5-4
5.4
5.4.1
HYGROPHIL® F 5673 Operating manual, Software version 1.8.x, 387896MDHEN(14.06.2013)

Editing parameters

● On the display, touch the field whose parameters you want to edit.

Selecting the parameter setting

● Use  and  to select the required setting, then confirm the
selection.
The change is not saved in the program memory until you also leave the su-
per ordinate menu by using  .