Permobil BodiLink Operation Manual page 9

HEIGHT AND DEPTH ADJUSTMENT
Adjusting the HEIGHT of the pad.
1 Loosen the locking screws (A),
2 Slide up the hardware top (B) to the desired
using the 3mm hex key.
B
A
Adjusting the DEPTH of the pad.
1
Loosen the screws (A),
2 Slide the pad (B) on the slot plate (C) to the desired depth, and then tighten screws (A),
using the 5mm hex key.
For additional depth, the slot plate may be rotated 180°: Remove the pad (B). Loosen the
screw (D), using the 3mm hex key. Rotate the slot plate 180°. Securely tighten the screw (D).
Reinstall the pad.
IMPORTANT: To remove and reinstall the pad, refer to "Pad Installation".
A
BodiLink Medial Knee/Thigh Support User Guide & Manual
using the 3mm hex key on both sides of the hardware.
height, and then tighten the locking screws (A),
using the 5mm hex key.
B
C
7
D