Permobil BodiLink Operation Manual page 12

MAINTENANCE
INSPECTION
Inspect all components of the equipment weekly.
Check and tighten all fasteners and adjustment
points.
Inspect all materials for wear such as stretching,
fraying, fractures, and bends. Some wear with
regular use is expected.
Components that show excessive wear should be
replaced. For information on replacements, refer to
the "Warranty" section in this manual.
REUSE
You must re-fit the support to the new user or after
extended periods of non-use by the same user.
Refer to the adjustment and use instructions in this
manual.
Before transferring to a new user, the product must
be completely cleaned and disinfected. Refer to the
cleaning instructions in this manual.
STORAGE
Assembly or individual parts should not be stored
in extreme hot or cold temperatures. Only store in a
clean and dry place at room temperature.
Do not allow exposure to direct sunlight for
prolonged periods of time. This could age the
product more rapidly and decrease its effectiveness.
Do not store where there is risk of open flame or
spark.
DISPOSAL
Dispose of the product and/or components in
accordance with the applicable regulations in your
jurisdiction.
CAUTION! DO NOT INCINERATE as a means of
disposal.
BodiLink Medial Knee/Thigh Support User Guide & Manual
10
WARRANTY
This product is covered by the
Permobil Lifetime Guarantee.
If a manufacturing defect
should occur, discontinue use
immediately.
If a manufacturing defect
should occur, the product will
be replaced at no cost to the
buyer. Register your product
at permobilus.com to activate
the Lifetime Guarantee.
Wear from regular use is not considered a
manufacturing defect. Replacement parts are
available by contacting your supplier, distributor, or
retailer.
Any alterations made to the product or defects caused
by irregular use voids the warranty. Compatibility
with the product is only guaranteed with the Permobil
products listed in this manual. Modifications in
attempt to interface with any other products voids the
warranty.
WARRANTY REPLACEMENT PROCEDURE
Warranty claims should be filed by the original
purchaser. End-users will need to contact the DME
Supplier, Distributor or Retailer from whom the
product was purchased. In the event the original
dealer is not available, any authorized Permobil DME
supplier, distributor or retailer will provide assistance.
DME suppliers, distributors or retailers with warranty
issues will need to contact Customer Support by
phone or email and provide the original purchase
order number, sales order number, or invoice
number whenever possible. A Return Merchandise
Authorization (RMA) will be issued by Customer
Support so a warranty replacement order or quote
can be processed.
COMMENTS
If you would like to contact us with your comments or
concerns, please visit permobilus.com or refer to the
"Contact Information" section of this manual.
We invite you to leave testimonials of the product on
our website on the individual product pages.