RF Elements StationBox XL Installation Instructions page 2

Check the product videos at YouTube:
4 Insert the Chassis into the StationBox.
Insert pigtails first, then slide the Chassis.
8 Install the Bracket on the 9 Attach the StationBox to the Bracket and slightly
Pole or on the Wall. Insert tighten the Nut. You should be able to move the
the Rubber Brake. StationBox.
www.rfelements.com
www.youtube.com/RFelementscom
5 Use the Security Screw to secure the
Chassis (optional).
6 Connect the ethernet cable. In case of
more cables, knock off the premolded
positions in the Cover.
10 Now you can smoothly position the antenna
in 3-Axis. Set the desired elevation, azimuth
and rotation by moving the StationBox
using the Ball joint.
7 Close the Cover. Make sure the side locks
lock properly.
11 While holding the StationBox in desired
position, tighten the Nut as much as you can.
Optional: To secure the position, use Security
Screw that cuts in the Ball part of the bracket.
SEP13