Maintenance; Regular Checks; Post-Avalanche Check; How To Remove The Detachable Airbag System - Scott ALPRIDE E1 User Manual

• X. INSTRUCTIONS

REGULAR CHECKS

Your SCOTT ALPRIDE avalanche backpack requires no maintenance but the following points have to be observed :
1- Deploy the airbag before the new season starts or at least once a year or after the backpack has been exposed to
moisture / w et weather. Check its condition, allow it to dry and fold it back together again.
2- Pack the airbag away only when it is completely dry.
3- Prior to every tour, check all the points described in this user manual and inspect the condition of the system's safety
straps and fastenings.
Practice deploying the airbag so you have a feel for the amount of force you need to apply. In the event of a real avalanche,
you will then be able to deploy it correctly and intuitively.
• XI. MAINTENANCE

POST-AVALANCHE CHECK

Every use of the SCOTT ALPRIDE E1 AIRBAG SYSTEM can negatively affect the material. Often the damage is not visible
with the naked eye. After a use in an avalanche, contact the authorized SCOTT Dealer where you have bought your SCOTT
ALPRIDE E1 AIRBAG SYSTEM for further inspection.
If you are unable to send the SCOTT ALPRIDE E1 AIRBAG SYSTEM, then following points are recommended to check :
• Check the airbags visually for punctures.
• Check the airbag fastening straps for tears.
• Check the shoulder, waist and chest straps as well as the seams for tears.
• Check all buckles (adjustment buckles at the shoulder straps, waist and chest strap).
• Check buckles as well as leg straps for tears and deformation.

HOW TO REMOVE THE DETACHABLE AIRBAG SYSTEM

1 Turn off the system, open the air bag zipper and
detach the hooks.
3 Push the trigger handle and the cable through the hole.
Open the velcro slot.
SWBAG_19_PACK-MNL_Alpride-E1_A5-148x210mm_v2.indd 11
2 Open the backpack, the compressor cover and the
shoulder strap pocket. Detach the trigger handle.
4 Pull the compressor and the air bag out.
11- ENGLISH
29.05.18 16:59