Parker SciLog LabTec Installation, Operating, & Maintenance Instructions page 4

Precautions
READ this manual BEFORE operating or servicing this equipment.
FOLLOW these instructions carefully.
DO NOT allow untrained personnel to operate, clean, inspect, service or tamper with
this equipment.
ALWAYS DISCONNECT this equipment from the power source before cleaning or
performing maintenance.
4
DISCONNECT ALL POWER TO THIS UNIT BEFORE
INSTALLING, SERVICING, CLEANING OR REMOVING
THE FUSE. FAILURE TO DO SO COULD RESULT IN
BODILY HARM AND / OR PROPERTY DAMAGE.
OBSERVE PRECAUTIONS FOR HANDLING
ELECTROSTATIC SENSITIVE DEVICES.
ONLY PERMIT QUALIFIED PERSONNEL TO SERVICE
THIS EQUIPMENT. EXERCISE CARE WHEN MAKING
CHECKS, TEST AND ADJUSTMENTS THAT MUST BE
MADE WITH POWER ON. FAILING TO OBSERVE THESE
PRECAUTIONS CAN RESULT IN BODILY HARM.
FOR CONTINUED PROTECTION AGAINST SHOCK
HAZARD, CONNECT TO PROPERLY GROUNDED
OUTLET ONLY. DO NOT REMOVE THE GROUND
PRONG.
IF THE POWER CORD IS LOST OR DAMAGED, CONTACT CUSTOMER SERVICE
TO OBTAIN A NEW ONE. DO NOT REPLACE IT ON YOUR OWN.
WARNING
CAUTION
WARNING
WARNING