Precautions For Use; Supported Projector; About The Handling Of The Product; Disposal - Panasonic ET-MDNDP10 Operating Instructions Manual

Precautions for use

This product is an interface board with two DisplayPort inputs for use
installed in a Panasonic projector.

Supported projector

PT-RQ22K
(As of April 2019)
Note
f Products other than the above may also be supported. Refer to the operating instructions for
your projector or the Panasonic website (https://panasonic.net/cns/projector/).
f If the main version of the firmware of the PT-RQ22K is less than 3.00, this interface board
cannot be used. Update the firmware to the latest version before use. Check the update
procedure by accessing the page containing the latest information on the firmware at the
Panasonic website (https://panasonic.net/cns/projector/pass/).

About the handling of the product

r Do not touch the connector section of the Interface Board
directly with your hands.
The component may be damaged by the static electricity. To prevent the
static electricity damage, remove the static electricity in your body by
touching the surrounding metal, etc. beforehand.

Disposal

To dispose of the product, ask your local authorities or dealer for correct
methods of disposal.
4 - ENGLISH
Precautions for use