Specifications - Panasonic ET-MDNDP10 Operating Instructions Manual

Specifications

Compatible slot
Connection terminals
Resolution
Supported
signals
Dot clock
frequency
Width
Dimensions Height
Depth
Weight
Note
f "SLOT NX" is a name of the slot unique to Panasonic supporting the signal input for the 4K
image.
f The video signal that can actually display will vary depending on the projector that the
Interface Board is installed. For details, refer to the Operating Instructions of your projector.
Specifications
SLOT NX specification
DisplayPort 2 lines
HDCP2.2 compatible, SST(Single-stream Transport) mode
compatible
Moving image signal: 480/60p to 4 096 x 2 160/60p
Still image signal: 640 x 480 to 3 840 x 2 400 (non-interlace)
25 MHz to 594 MHz
151 mm (5-15/16")
38.5 mm (1-17/32")
142 mm (5-19/32")
380 ] (13.4 ozs.)
ENGLISH - 9