Pc-Interface; Installation; Installing Suunto Training Manager; Installing Usb Drivers For Suunto Sport Instruments - Suunto T6 User Manual

Wristop personal trainer with heart rate monitor

Hide thumbs Also See for T6:

Table of Contents

5.5. PC-INTERFACE

With the PC-interface cable you can transfer information between your Suunto t6 and

your computer. The interface cable is delivered in the same package with your

Suunto t6. The PC interface cable is plugged to the USB port of your computer, and

the other end of the cable clips on to your Suunto t6 with three docking points.

In order to use Suunto Training Manager you will need to install both the Suunto

Training Manager software and appropriate Suunto USB drivers.

To install Suunto Training Manager:

1. Insert the Suunto Training Manager CD-ROM into the drive.

2. Wait for the installation to begin and follow the installation instructions.

NOTE: If the installation does not automatically start, click Start --> Run and type

D:\setup.exe.

These instructions assume that you are installing Suunto sports Instrument drivers on

a clean system, i.e. one that does not contain any Suunto sports Instrument drivers. If

this is not the case, uninstall the previously installed drivers before proceeding with

the installation. See section 5.7 Uninstalling USB drivers for Suunto sport instruments

for more information.

WINDOWS 98

The installation is in two parts. First you install the drivers for the Suunto sports

instrument and then for the virtual USB serial port.

Table of Contents