Calibrating The Wireless Speed And Distance Sensor; Pair - Suunto T6 User Manual

Wristop personal trainer with heart rate monitor

Hide thumbs Also See for T6:

Table of Contents

3.5.6. Calibrating the wireless speed and distance sensor

Alternatively, you can provide the calibration factor manually by scrolling with the UP/

DOWN buttons.

More information on calibrating your wireless speed and distance sensor can be

found in the User's Guide for the wireless speed and distance sensor.

This function is identical to the Pair function described in section 3.4.7. Pair.

To calibrate the wireless speed and distance sensor, first

cover a known distance using the stopwatch. Then

complete the following steps:

1.In the Speed/Distance menu, scroll to Calibrate and

press ENTER.

2.Press UP/DOWN to select the wireless speed and

distance sensor you want to calibrate and press ENTER.

3.Press UP/DOWN to select Calibrate.

4.Set the covered distance with UP/DOWN.

5.Press ENTER to finish calibration. The device

calculates and displays the calibration factor on the

second row of the display.

Table of Contents