Heart Rate Transmitter Belt; Activating The Heart Rate Transmitter Belt - Suunto T6 User Manual

Wristop personal trainer with heart rate monitor

Hide thumbs Also See for T6:

Table of Contents

NOTE: Battery covers of the transmitter belt and the wristop computer are not inter-

changeable.

1.9. HEART RATE TRANSMITTER BELT

To activate the transmitter belt:

1. Attach the transmitter to the elastic strap.

2. Adjust the strap length to fit snugly and comfortably. Secure the strap around your

chest, below the chest muscles. Lock the buckle.

3. Raise the transmitter a little off your chest and moisten the grooved electrode area

on the backside. The electrodes must be wet during the exercise.

4. Check that the wet electrode areas are firmly against your skin and the logo is in a

central upright position.

5. Wear the Suunto t6 like you would wear an ordinary watch.

6. In the Training mode, long press ALT/BACK to connect your Suunto t6 to the heart

rate transmitter belt. Wait for acknowledgement that the transmitter belt has been

found.

7. Activate the stopwatch in the Training mode.

NOTE: We recommend you to wear the transmitter against your bare skin to ensure

flawless operation.

Table of Contents