Care And Maintenance; Warranty; Water Resistance - Suunto T6 User Manual

Wristop personal trainer with heart rate monitor

Hide thumbs Also See for T6:

Table of Contents

1.4. CARE AND MAINTENANCE

Only perform the procedures described in this manual. Never attempt to disassemble

or service your Suunto t6. Protect your Suunto t6 from shocks, extreme heat and

prolonged exposure to direct sunlight. If not in use, store your Suunto t6 in a clean

and dry environment at room temperature.

Your Suunto t6 can be wiped clean with a lightly moistened (warm water) cloth. If

there are stubborn stains or marks, you can apply mild soap to the area. Do not

expose your Suunto t6 to strong chemicals, such as gasoline, cleaning solvents,

acetone, alcohol, insect repellents, adhesives and paint, as they will damage the

unit's seals, case and finish. Keep the area around the sensor free of dirt and sand.

Never insert any objects into the sensor opening.

For warranty and additional care and maintenance instructions please refer to the

separate "Warranty, Care and Maintenance - Wristop Computers" leaflet.

Your Suunto t6 is water resistant up to 100 m/330 ft and the transmitter belt to 20m/

66ft according to ISO 2281 standard (www.iso.ch). This means that you can use your

Suunto t6 for swimming and other water sports activities but it must not be used for

scuba diving or freediving.

To maintain water resistance and to ensure that the warranty remains valid, it is

strongly recommended to have all service, except for battery change, done by

authorized Suunto service personnel.

NOTE: Never push the buttons while swimming or in contact with water. Deliberate or

unintentional pressing of the buttons while the unit is submerged could cause the unit

to malfunction.

Table of Contents