Autolap - Suunto T6 User Manual

Wristop personal trainer with heart rate monitor

Hide thumbs Also See for T6:

Table of Contents

3.5.3. Autolap

With this function you can set the Suunto t6 to record lap

times automatically by setting the lap distance. After the

stopwatch is started, the Suunto t6 alerts and records lap

times and other data after every completed lap. If Autolap

is active, number

of the SPD/DST mode display. Refer to chapter 4 for

more information on autolaps.

To set the autolap:

1. In the Speed and distance menu, scroll to Autolap and

press ENTER.

2. Select On with UP/DOWN and press ENTER.

3. Set the lap distance with UP/DOWN and press

ENTER.

NOTE: Autolap can be set to alert in a range between 0.0 and 99.9.

NOTE: When a timer or Autolap is on, Suunto t6 stores information to the log accord-

ing to the settings that were valid when you activated the stopwatch. If you adjust the

settings after activating the stopwatch, Suunto t6 will still use the old settings. The

new settings will only come to effect after you reset the stopwatch and start it again.

is displayed on the right hand side

Table of Contents