Table of Contents
Advertisement
Choosing the storage location
You can set the drive and folder for saving recorded video pictures.
If you don't choose a setting then the video sequences and snap-
shots are saved to C:\ . Your selection is cancelled when you close
the browser, so when you next start it up you will need to choose
the storage location once again.
"
Click on the button to select the storage location and a dialog box
opens to enable you to choose the folder.
"
Select the desired drive and folder. The currently selected folder is
shown in the Path: field.
"
If necessary click on the New... button to create a new sub-folder
within the current folder.
"
Finally click on OK to close the window.
Start/Stop recording
You can start or stop live picture recording at any time.
"
Click the record button. Recording is started immediately. While
recording the button shows a flashing red dot.
"
Click the button again to stop recording. Recording is stopped
immediately and the red dot disappears leaving a black rectangle.
AVI files
During each recording an AVI file is deposited in the selected folder.
The filename shows the date and time of recording. So always
ensure that your computer's date and time functions are set cor-
rectly!
Example: 12_04_01_11h45m30s.avi
The recording was started on 12th April at 11.45 and 30 seconds.
Saving individual pictures
You can save an individual picture from the current visible video
sequence whenever you want.
"
Click on the individual picture (snapshot) button. The chosen pic-
ture is saved immediately.
VideoJet 100
Operation
81
Advertisement
Table of Contents
