Table of Contents
Advertisement
Configuration with web browser
Software update
Software update:
The VideoJet 100 is designed in such a way that its functions and
parameters can be updated with software. In such cases, transmit
the updated software package via the selected network to the
device. On termination of the connection, the software will be auto-
matically installed. This allows a device to be remotely serviced and
updated without a technician having to modify the device installa-
tion on site. The latest software can be obtained from your VCS
Service centre or from the Internet via the download site under
www.vcs.com..
Attention!
Before starting the software upload, ensure that you have selected
the correct upload file! An upload of other files can result in the
device being no longer addressable and having to be replaced. On
no account interrupt the installation of the software. An interruption
will result in damage to the flash EPROM. This can result in the
device being no longer addressable and having to be replaced.
"
Save the update file to your hard disk.
"
Enter the complete directory path of the update file or click on the
button Durchsuchen... to find the file.
"
Click on the button Upload to start the transmission of the file to the
device. You can follow the transmission procedure with the status
messages and the completion bar.
After approx. 30 seconds, the message upload complete - WAIT
will be displayed and the green LED of the VideoJet 100 flashes.
The new software will now be unpacked and the flash EPROM will
be reprogrammed.
At the next call-up of the configuration page Service settings, the
message new firmware installed will be displayed. The message
upload failed signals that the upload of the new software failed
(e.g. file name entered is not valid software). Repeat the upload
procedure, possibly with a different file.
72
VideoJet 100
Advertisement
Table of Contents
