VCS VideoJet 100 Manual page 41

Video on Enable M-JPEG or VCS ActiveX:
start page
You have the possibility to choose whether live pictures are dis-
played by JPEG server push (M-JPEG) or by the installed ActiveX
control (VCS ActiveX).
Note
If the ActiveX control is not installed on your computer, a corres-
ponding message will be displayed when you switch to the live
image page. The latest version of the ActiveX control is available
from your VCS service centre or from the Internet via the download
site under www.vcs.com.
JPEG settings You can store video images in JPEG format at certain intervals on
an FTP server. These images can be called up again later, thus
enabling for example alarm events to be reconstructed.
JPEG format:
Here you can choose the format of the JPEG pictures:
File name:
You can set what file names are to be generated for the transmitted
snapshots.
!
!
VideoJet 100
S 176 x 144 pixel
M 352 x 288 pixel
L 704 x 288 pixel
XL 704 x 576 pixel
Overwrite: The same file name is always used. The existing file
is continuously over-written with current data.
Increment: A number from 000 to 255 is attached to the file-
names. This automatically increases by 1 every time a new file
is created. When 255 is reached the numbers begin again
at 000.
Configuration with web browser
41