Table of Contents
Advertisement
Configuration with web browser
Tracker:
For specific applications it can be useful that an alarm is only
triggered when single objects are recognized to move in certain
directions, e.g. when only entering a room is to trigger an alarm, not
leaving it. To activate Motion tracking for single objects set it to on.
Then fix the direction of motion desired for the triggering of an
alarm. To do so activate at least one vertex of the Tracker window
by clicking. When all vertices are activated all movements of a
single object trigger the alarm. To deactivate a vertex just click on
it again.
If e.g. all motions with a component to the left and upwards are to
trigger an alarm then the vertex at the top on the left has to be acti-
vated. If all motions directed to the left are to trigger an alarm then
the vertex on the bottom left must be clicked, too.
In the window an arrow indicates the position of the object that
triggered the alarm and the velocity and direction of its motion.
By clicking the Defaults button you return all parameters to the
standard settings. To return to the alarm page click on Back to
alarm page!.
VideoJet 100
49
Advertisement
Table of Contents
