Table of Contents
Advertisement
Configuration with web browser
DHCP:
With the Dynamic Host Configuration Protocol set to On a (chang-
ing) IP address is assigned to the device automatically. If you want
to give it a dedicated IP address choose Off.
Mail server IP address:
Enter the corresponding IP address here if the device is to use the
e-mail function. Outgoing e-mails are transmitted via the entered
address to the mail server. Otherwise the field can be left blank
(0.0.0.0).
Mail reply address:
Enter an e-mail address here if the device is to use the e-mail func-
tion. The input informs the receiver of an e-mail about the sender.
Otherwise the field can be left blank (0.0.0.0).
Base port:
If necessary you can change the base address for the UDP chan-
nels used for the video, audio and data transmission. The
VideoJet 100 uses 14 channels.
For example if your system has a firewall, you will need to authorize
data transfer in each of these 14 channels, starting from the base
address.
VideoJet 100
69
Advertisement
Table of Contents
